This FJ40 had been stored indoors in Central California for decades prior to starting the multi-year, thousands of hours build.

The FJ was professional built with the assistance of multiple top FJ professionals in the United States and Australia.

-The frame was powder coated as well as more than 1,000 other parts

-The body, which was rust free, was bolted on a rotisserie and hand sanded to bare metal, primed and triple painted in single stage Destroyer Grey

-The motor is a new crate GM Performance Parts Ram Jet PFI 

-Special fabricated extra wide forward air filter intake

-The transmission is a 7000R-4 professionally built with all new heavy-duty top performance components and tuned specially to this FJ40

-Aluminum radiators for motor, transmission and A/C

-Orion heavy-duty transfer case

-Tom Woods custom drive shafts

-Burgeson U-Joints

-Axels’ internal parts replaced with Chromoly components

-9.5 inch semi-float aluminum differential armor

-FJ 40 Knuckles replaced with FJ60 knuckles and Koyo bearings

-New disc brakes front and rear with Wilwood brake booster and proportioning valve using custom bent stainless steel brake lines

-ARB compressor

-ARB air-lockers

-Mickey Thompson wheels including spare

-Old Man Emu Nitrocharger shocks and steering stabilizer

-Old Man Emu Dakkar 2 1/2 inch lift leaf springs

-Saginaw power steering

-Manafree super heavy-duty tie rod assembly

-New steering column, 32 inch steel with tilt and telescoping shaft 

-Grant steering wheel

-Gas hood struts

-BTB 22.5 gallon fuel tank was installed with a custom fabricated thick steel tank guard 

-BTB Custom manufactured rear and front bull bar bumpers

-Swing out and locking spare wheel and tire bracket on rear bumper, driver’s side

-Swing out and locking custom Yeti cooler basket with new Yeti cooler, passenger side

-Hella oval work lamp with telescoping removable pole handle allowing to put light wherever needed

-Both forward and reverse cameras

-Trailer hitch receiver

-Double rear bumper receptacles, one for trailer light cable the other for compressed air hose

-Recovery hooks front and rear

-Warn 9.5 CTI Winch with dual controls either from the interior switch panel or exterior control harness

-Woven stainless steel diamond pattern front grills

-Two Gel batteries

-Gas hood shocks

-Sanderson Custom Headers

-MSD plug wires

-Dual exhaust systems with electronic cutouts operated from the interior aircraft panel which can switch between two separate mufflers depending on desired exhaust volume.  That switch is labeled Showtime.

-Waterproof wiring harness

-Original OEM 1969 FJ40 lights

-Clayton billet throttle pedal assembly

-Heavy-duty double arm brake pedal

-Stainless Steel hardware replaces steel nuts, bolts and washers throughout the FJ

-CA black and yellow "69 FJ40” license plates

-The interior floor and firewall of the received 3 separate applications.  First was a ceramic heat shield, second coating is sound deadening and the final coat was a color matched rhino coating for durability

-Wheel wells rhino coated

-The interior body sides were primed and painted in the same Destroyer Grey as the exterior body

-Dynamat was used in the doors, speaker boxes etc.

-Full roll cage that doubles as a sealed compressed air tank controlled by a dash switch or intently from the compressor

-Functioning original kick out air vents

-Four retracting 3 point shoulder harness seat belts

-New Toyota OEM  glass, rubber molding and weather stripping

-Tumble and fold year seat

-Center dash lower extension fabrication allows A/C controls, two extra A/C vents as well as original ashtray

-Custom fabricated forward floor mounted frame that the front seats mount to as well as a double storage Tuffy center console that houses a 110 A/C inverter, controls to to the flexible map light that is both white or night time red light that is dimmable and can light any area of the interior.  

-Below the center console there is a floating bracket for the Rockford Fosgate amplifier that is suspended above the center tunnel to allow wet cleaning of the floor.

-Below the front passenger seat (where the original fuel tank was located) is a metal exterior sealed Image Dynamics 10 inch sub woofer cabinet with dynamat insulation.

-Front speakers are JBL separates, rear speakers also JBL speakers

-Kenwood Head unit the displays both front and rear cameras, Bluetooth, radio and SirusXM radio

-Interior courtesy lights that come on when a door is opened

-Four cup holders, two front and two rear attached to the center console.

-Backseat and front USB ports

-Most interior controls are operated by an easy access new custom aircraft switch panel

-All new seats with two tone upholstery that match the roll cage pads and headliner

-Air conditioning and heating is supplied by Old Air designed system.

-Driver gauges are color matches VDO gauges that have satellite speed confirmation.

-Windshield wiper fluid dual nozzle system that operates from interior panel